manualshive.com logo in svg

Geely Emgrand 2015, Manual

The Geely Emgrand 2015 is a stylish and efficient vehicle that offers exceptional performance on the road. To make the most of your driving experience, download the free user manual from our website. This comprehensive manual provides detailed instructions and insights to ensure you maximize the potential of your Geely Emgrand 2015.

Share
Download
background image

Starting and Driving

142

Export

The Cruise Control button is on the steering       
wheel.

1.

ON/OFF button

:Press this button   

to open and close the cruise control      
system. The LCD indicator lights on the      
instrument cluster will be on/off.

2.

Cancel button

: you can press this     

button to cancel the cruise control with-      
out deleting the record of speed set.

3.

RES + (recovery/acceleration)  :  Press    
this button to restore the original set-      
tings of the speed or acceleration.

4.

SET - (SET/deceleration) : press this     
button to set the speed or slow down.

If you keep the cruise control system      
running without the use of the cruise      

control, you may touch the button and enter       
the cruise state accidentally. You may be      
frightened by it and make the vehicle out of        
control. Therefore, we should keep the 

 

 

 

 

cruise control switch "disconnected" until    
you want to use the cruise control.

Setting Speed

1.

Press 

 to turn on the cruise control.       

The indicator light on the instrument     
board will be illuminated.

2.

Press RES + or SET - button to set the         
cruise speed required

3.

Press and release the SET button. The      
current  speed  will  be  saved.  The  set      
speed will be indicated briefly on the      
instrument cluster LCD.

Recovery of the Set Speed

If you have set the cruise control at the        
speed required, you can press the brake      
pedal. The cruise control will be canceled. If       
you want to restore the preset speed, when       
the speed reaches about 38 km/hour or      
above, you can press the button toward      
RES  +  direction.  You  can  increase  the      
speed to the preset one in that way.

Accelerating under Cruise Con-   
trol

There are two ways to speed up:

•

Pressing the accelerator pedal can    
increase the speed of the vehicle.

•

If the cruise control system has been      
enabled, you can press the button     
toward  RES  +  direction  and  hold  the      
button until the speed is increased to      
the desired one, and then release it. If       
you  just  want  a  slightly  higher  speed,      
you can press and release the button      
toward RES + direction. Every opera-     
tion in this way can increase the speed       
by 2 km/hour.

Summary of Contents for Emgrand 2015







































































































































































































































Reviews:

No comments

Related manuals for Emgrand 2015

Laser 4832 Manual preview
4832
Brand: Laser Pages: 8
iDataLink maestro Pr 2 Install Manual preview
maestro Pr 2
Brand: iDataLink Pages: 99
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16
Mazda 2 2016 Owner'S Manual preview
2 2016
Brand: Mazda Pages: 720
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manual preview
v.LOGiC Intelligent Solution V5-NTG46
Brand: Caraudio-Systems Pages: 18
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
Skoda Fabia II 2007 Workshop Manual preview
Fabia II 2007
Brand: Skoda Pages: 165
Quadratec 12057.0263 Installation Manual preview
12057.0263
Brand: Quadratec Pages: 12
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
Ford TRANSIT CUSTOM Quick Reference Manual preview
TRANSIT CUSTOM
Brand: Ford Pages: 15
Honda 08L04-SZA-100 Installation Instructions preview
08L04-SZA-100
Brand: Honda Pages: 3
Mercedes-Benz A 150 Owner'S Manual preview
A 150
Brand: Mercedes-Benz Pages: 305
Volvo S90 TWIN ENGINE Owner'S Manual preview
S90 TWIN ENGINE
Brand: Volvo Pages: 662

Brands by name

Popular brands

Load more brands