Chicago Faucets
®
Commander
™
Handheld Programming Unit User Guide
Page 5
CF2026 / 07/19
Section 1: Introduction, Device, Updates
1.3
Device Settings
Quickly adjust Commander HPU
settings for improved usability
such as:
– Auto-sleep time
– Display brightness
– Time/date
– Calibrate screen
Basic Commands
BACK
To previous screen
HOME
To Main Menu
SET
To save and execute setting; and return to previous screen
SAVE
Saves data to Commander device only
CANCEL
Stops command and returns to previous screen
<
Information list continues on previous screen
>
Information list continues on next screen
Set screen display brightness from
1 to 100%, for ease of viewing
and/or power saving (dimmer =
battery saving).
Unit auto-powers off after preset time
to save on battery life (1 to 5 minutes).
Note:
Auto-Sleep does not function
when Commander HPU is in “USB
Mode”.
Set time and date: 12 hour clock;
MM/DD/YYYY. Must be set after
each battery charge.
Calibrate screen: Use stylus to tap each
screen corner as directed by the screen
instructions.
(Only required when having
difficulty with screen touch response.)
Note:
A calibration is recommended
after every Commander HPU Reset.
