manualshive.com logo in svg

Geberit Chicago Faucets Commander, Manual

Share
Download
Geberit Chicago Faucets Commander Manual Download Page 26

Chicago Faucets

®

 Commander

™

 Handheld Programming Unit User Guide 

Page 26 

CF2026  /  07/19

SECTION 2: Scanning, Mode and Setting Adjustments

2.6.3   Reset

 Reset

 allows the user to view existing fitting settings relative to the factory  

 

setting. This is important if the fitting is not operating correctly, or there is a need  

 

to cancel the current Settings. There are two options available: Factory (Default)  

 

or Current (as of last SET command)

Factory

 

—

 

Shows what the factory settings 

are for the scanned fitting. 

FAC

 Initiates 

Reset of fitting to match Factory Setting

Current

 

—

 

Lists current settings for the 

fitting, including any settings that may have 
been modified after the fitting was installed.

CUR

 

—

 

Initiates Reset of fitting to match  

Current Settings

FAC

 

—

 

Initiates Reset of fitting to match  

Factory Setting

Warning: 

Some data loss may occur when using RESET - 

(example, but not limited to number of uses, uses per day). 
This occurs because scan data is not written to the module 
immediately. The information buffers for a certain time, and 
is written to the module at some later date. Any scanned 
information in the buffer will be lost by using RESET.

To execute command:

Tap “FAC” for reset to factory setting

OR

Tap “CUR” for reset to current settings

Reset caution appears. Tap “SET” to continue or 
“CANCEL” to end command with savings

Summary of Contents for Chicago Faucets Commander













































Reviews:

No comments

Brands by name

Popular brands

Load more brands