Chicago Faucets
®
Commander
™
Handheld Programming Unit User Guide
Page 10
CF2026 / 07/19
SECTION 2: Scanning, Mode and Setting Adjustments
2.1 Introduction
The Chicago Faucets Commander HPU’s ability to scan a Chicago
Faucets fitting provides quick and easy access to diagnostic and general
fitting information, as well as the ability to add new fittings and notes to a
database, modify fitting modes and adjust settings, and reset fittings.
1) Add fitting to database.
See Section 2.2 for more details.
2) View a direct indication of the fitting status. Is it operating
properly or need maintenance?
See Section 2.2 for more details.
3) Create or edit location and other fitting notes.
See Section 2.3 for more details.
4) Review fitting history.
See Section 2.3 for more details.
5) Review Current Settings relative to Factory Settings and reset
flitting if needed.
See Section 2.4 for more details.
6) Access fitting specific diagnostics.
See Section 2.5 for
more details.
7) Access fitting mode changes or other adjustments including
CLEAN Mode.
See Section 2.6 for more details.
8) Scan the same fitting again or scan another fitting.
See Section 2.7 for more details.
9) Access CFC Contact info.
See Section 2.7 for more details.
2.2 Scan Fitting
*For best scanning performance stand
and aim approximately a foot away
Tap SCAN FITTING*, and aim
Commander device at fitting
sensor from about 1 foot away.
Here is what it looks like:
Refresh reader to return to main
menu. Select scan fitting.
If fitting is not detected within
30 seconds, a SCAN FAILED
message is returned.
Suggested step, try again, slightly
closely to sensor eye
If fitting still will not scan after second
attempt, refer to Section 7,
Troubleshooting for more details or
Contact CFC.
