Chicago Faucets
®
Commander
™
Handheld Programming Unit User Guide
Page 36
CF2026 / 07/19
Section 6: Advanced Functions
1) Engineering Mode*
— very powerful; useful for large installs or bank
installations where repeated identical setups are required, and to do
so without having to go through SCAN steps for every fitting
(time saver … one button immediate update).
Modes, Run times, Delay intervals
— Enable, disable all available
fitting modes and run times
Clean Mode
— enable and set duration
Other Modes
— enable and set duration and intervals
Range and Sensing
— enable preset distances, fine adjustment and
turn off/on upper and lower beams (and with special option)
Disable/Enable Remote device changes
— to prevent tampering
(even with another device around, only those with access to
engineering mode can make any changes)
Other special information designed for factory troubleshooting in
tough cases where normal procedures, settings can’t solve the issue
*Note: not all functions are available for each fitting.
2) Pipe Clean Mode
— permits fitting to run continually for up to
21 hours without stopping, in cases of deep line purging or disinfection
or other water treatments.
Note:
both applications can be active at together.
For applications that could benefit from either of these modes,
contact CFC Technical Support to register your device
(if you have not already done so)
and request a password to unlock
these special modes.
6.4 Specialized Functions
Commander has 2 specialized functions for specific needs:
1) Tap "About"
2) Tap "Advanced Features"
3) Tap Desired Mode
