GEA T.VIS M-15, Operating Instruction

Page: 101 / 120

Requirement:
• When fitting the pneumatic block, make sure that it is compatible!
• Insert the pin (8.1) on the pneumatic block into the groove of the base (5)!
Use the following pneumatic block types on ASEPTOMAG valves:
– Pneumatic block T.VIS-15/NOT 3PV/ASG material no. 221-646.93
– Pneumatic block T.VIS-15/ 3PV/ASG material no. 221-646.92
Fig.75
Fig.76
Fig.77
Pneumatic block (8.2) for max. 1 solenoid valve / pneumatic block (8) for max. 3
solenoid valves
Carry out the following steps:
1.
Fit the pneumatic block in the reverse order.
Maintenance
Dismantling the Control Top into its Components
430BAL010697EN_2
15.04.2020 101