GEA ECOVENT N ECO Series, Operating Instructions Manual

Page: 80 / 106

5. Use the insertion tool to press in the
V-ring – press in evenly at several op-
posite points along the circumference.
6. Insert the V-ring evenly.
Þ
V-ring has been exchanged.
INFO Used seals must not be used again, since the proper function of the
seal can then no longer be ensured.
9.7.2.2 Replacing more seals
Prerequisites
●
The valve has been removed, see
9.5 Removing the valve
.
●
Insert V-Ring without grease. To facilitate fitting, use water with a drop of
washing-up liquid to remove the surface tension. In order that no rust is trans-
ferred, the washing-up liquid solution must be made up in a ceramic, plastic, or
stainless steel container.
INFO
Functional and running surfaces of the valve disks must not get damaged.
1. Replace all the other seals identified in the spare parts lists. See spare parts list
12
Spare parts
.
Þ
Seals have been replaced.
INFO Used seals must not be used again, since the proper function of the
seal can then no longer be ensured.
80 / 106 - 9.7 Maintenance
0000000576 - 001 - EN-GB