GEA ECOVENT N ECO Series, Operating Instructions Manual

Page: 57 / 106

3. Release the valve disk (15) using the
jaw wrench at the wrench flat surface
(15.1) and unscrew of the actuator
(A). To do this, affix with a belt
wrench.
4. Remove the seal disk (3) and seal ring
(1) from the valve disk (15).
5. Remove the bearing (2) from the lan-
tern (9).
6. Unscrew the lantern (9) out of the ac-
tuator (A) using the installation mate-
rial ECO-lantern (Z). To do this, affix
with a belt wrench.
7. Remove the locking ring (4) from the
lantern (9).
15
15.1
A
3
5
1
7
9
2
4
Z
Þ
The valve insert has been dismantled into its individual parts. Seals are freely acces-
sible.
9.5 Removing the valve - 57 / 106