background image

2

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock,  

or to prevent property damage, personal injury, or loss of life.

  This Zoneline must be properly installed in 

accordance with the Installation Instructions before it 
is used. See the Installation Instructions in the back  
of this manual.

  Immediately replace all electric service cords that 

have become frayed or otherwise damaged. A 
damaged power supply cord must be replaced with a  
new power supply cord obtained from the 
manufacturer and not repaired. Do not use a cord 
that shows cracks or abrasion damage along its 
length or at either the plug or connector end.

  Unplug or disconnect the Zoneline at the fuse box or 

circuit breaker before making any repairs.

NOTE: We strongly recommend that any servicing be 
performed by a qualified individual.

  These R410A air conditioning systems require 

contractors and technicians to use tools, equipment 
and safety standards approved for use with this 
refrigerant. DO NOT use equipment certified for R22 
refrigerant only.

Replacing an existing unit?

For details, see the Installation Instructions in this 
manual.

SAFETY PRECAUTIONS

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS

 

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.  All safety 

messages will follow the safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”.  These words are defined as:

   

 

  

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

   

 

  Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

   

 

  Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

SAFETY INFORMATION

WARNING

DANGER

CAUTION

WARNING

Summary of Contents for Zoneline AZ45





























Reviews: