background image

8

Auxiliary controls on your Zoneline.

Constant ON Fan

Press MODE until a 4 appears in the first digit of the display to 

set the fan to run continuously at high speed, even if the unit is 

turned off. Press the 

pad for OFF “      “ or the 

pad for  

ON “      .” This is shown in the second digit of the display. Press 

AUX SET to confirm your selection and exit AUX SET mode, or 

press MODE to continue setting other functions.
The default setting for Mode 4 is OFF.

MODE 4

)UHH]H6HDW6HQWLQHO

When Freeze Sentinel is activated, it automatically provides 

heat without user interface. This helps to prevent plumbing 

damage by turning the heater and indoor fan ON at 41ºF and 

OFF at 46ºF. 
When Heat Sentinel is activated, it automatically provides 

cooling without user interface. This helps to prevent an 

excessively hot room by turning the air conditioner ON at 85ºF 

and OFF at 80ºF.
Press MODE until a 3 appears in the first digit of the display for 

Freeze Sentinel mode. The COOL LED light on the main control 

will be on. Press MODE again to change to the Heat Sentinel

The HEAT LED light on the main control will be on. Press the 

pad for OFF “      “ or the 

pad  for ON “     “.  This is shown 

in the second digit of the disply.  Press AUX SET to confirm your 

selection, and exit AUX SET mode, or press MODE to continue 

setting other functions.
In the default setting for Mode 3, Heat Sentinel is off, Freeze 

Sentinel is on.
NOTE: These functions are active whenever the unit is 

plugged in, even if the unit is turned off.

MODE 3

Freeze Sentinel OFF

Freeze Sentinel ON

Heat Sentinel OFF

Heat Sentinel ON

Constant 

Fan OFF

Constant 

Fan ON

)DKUHQKHLW&HOVLXV

This feature allows the individual to switch the temperature 

units between Fahrenheit and Celsius on the display. Press 

MODE until a 2 appears in the first digit of the display for 

Fahrenheit/Celsius mode. Press the  

 pad to select Celsius 

or the 

+

 pad to select Fahrenheit. The individual will see an 

F for Fahrenheit or a C for Celsius based on the selection.
The default setting for Mode 2 is Fahrenheit.

MODE 2

° F

° C

Summary of Contents for Zoneline AZ45





























Reviews: