GE VersaPoint IC220PBI002, User Manual

Page: 195 / 202

GFK-1911B Appendix D The NIU GSD File D-21
D
GSD File for NIU Version IC220PBI001
Use this file for NIU version module IC220PBI001.
This file should also be used for module IC220PBI002 when DIP switch 8 is in
the Off position. See chapter 4 for more information about setting this switch.
;***************************************************
; GSD-File for VersaPoint PROFIBUS-DP NETWORK
INTERFACE UNIT
; Manufacturer : GE
Intelligent Platforms
North America
; Article-No. : IC220PBI001-AA
; Hardware-Release : 02
; Firmware-Release : A (41 hex)
; GSD-Revision : 1.03
; Date : 31.01.2003
;***************************************************
;****************** History **************************
; Revision Change
; 1.00 -initial product release
; 1.01 -corrected entry for 2ch analog output module
; 1.02 -new modules added
; 1.03 -new modules added, module discription changed
;***************************************************
#Profibus_DP
GSD_REVISION = 2 ; version ID of the GSD file
format
Vendor_Name = "GE " ; manufacturer name
Model_Name = "VersaPoint Profibus NIU" ; device name
Revision = "V2.0" ; device revision
Ident_Number = 0x05B9 ; product ID
Slave_Family = 3 ; device family class
Protocol_Ident = 0 ; protocol ID of the device
Station_Type = 0 ; device type
FMS_supp = 0 ; no DP/FMS mixed device
Hardware_Release = "V2.0" ; hardware revision
Software_Release = "A" ; software revision
Bitmap_Device = "GEF05B9N" ; device bitmap - normal
state
;Bitmap_DIAG = "GEF05B9D" ; device bitmap - diagnostic
state
9.6_supp = 1 ; supported baudrates
19.2_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
MaxTsdr_9.6 = 60 ; device response times
MaxTsdr_19.2 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 550
MaxTsdr_12M = 850
Redundancy = 0 ; no redundancy
Repeater_Ctrl_Sig = 2 ; connector signal CNTR-P:
TTL level
;********************************************
;********* slavespecific data *****************
;********************************************
Freeze_Mode_supp = 1 ; device supports freeze
mode
Sync_Mode_supp = 1 ; device supports sync mode
Auto_Baud_supp = 1 ; automatic baud rate
recognition
Min_Slave_Intervall = 1 ; min cycle time 0.1ms
User_Prm_Data_Len = 0 ; length of User_Prm_Data
Max_Diag_Data_Len = 16 ; max length of diagnostic
data
;************************************************
;********* modular device ************************
;************************************************
Modular_Station = 1 ; modular device
Max_Module = 64 ; max 64 modules