GE UTX878 Ultrasonic, User Manual

Page: 48 / 103

March 2004
3-2 Displaying Data
Changing the Channel
Note:
This option is available only for 2-channel versions of the
UTX878.
The first parameter on the screen in the upper left is the Channel
Number. You can change the display to show either of the two
channels, or the average, sum or difference of the channels.
1. When you have highlighted the channel number, press [ENT].
2. The screen displays a list of options:
•
Channel 1
•
Channel 2
•
AVG
•
SUM
•
DIFF
Scroll to the desired option, and press [ENT]. The display screen
reappears with the new channel.
Changing the
Measurement Parameter
The next parameter, in the center, is the measurement parameter
(velocity, volumetric, forward or reverse total, soundspeed and
diagnostic parameters). To change the measurement parameter:
1. Use the [
W
] or [
X
] key to highlight the measurement parameter,
and press [ENT].
2. The screen displays a list of parameters:
•
Velocity
•
Volumetric
•
Fwd Total
•
Rev Total
•
Soundspeed
•
Diagnostic
Scroll to the desired parameter, and press [ENT]. The display screen
reappears with the new measurement.
Note:
To select a particular diagnostic parameter or unit, select
Diagnostic and proceed to Changing the Measurement Units
on the next page.