GE Optima XR220amx Operator'S Manual Download Page 71 | Manualshive

Page: 71 / 92

background image

Appendix A: Login Administration

Optima XR220amx X-Ray System

54400222-1EN

Rev 1 DRAFT 11092010

A-13

Operator Manual

© 2010 General Electric Company. All rights reserved.

Change User Roles

Users roles cannot be directly changed from the Local Users panel. Roles are actually associated with
groups, and users belong to groups. In order to change the roles for a user, you must change the roles of
a group to which that user belongs.

Locking / Unlocking a User

Once a user is in context, you can see if the user is locked by looking at the status of the Locked checkbox
in the bottom panel. If this is checked, then the user cannot login even with a correct password.

1. To unlock the user, uncheck the checkbox, and press Apply Configuration button.

2. To lock a user, check the checkbox and press the Apply Configuration button.

Note:

If Emergency User is enabled, you can still login through Emergency User while the system is lock.

Force a User to Change Password on Next Login

Often times if you are an administrator, you would like to force a user to change his or her password the
next time they login for security reasons. You can do this using EA3.

1. Select User

2. Check the Change Password on Next Login checkbox in the bottom panel.

x

If this is checked, then the user will be asked to change their password on the next successful login.

Note:

Once the user changes the password on the next login the check will be removed from this user.

Some fields may not be selectable if the following conditions occur.

x

For Users:

–

Permanent - If a user is permanent, they can never be removed. When a permanent user is in con-
text, the 'Remove User' button will be disabled.

–

Content Not Editable - If a user is flagged as this, then their group memberships cannot be
changed. When a 'content not editable' user is in context, the 'Add To Groups', and Remove From
Groups' buttons are disabled.

–

Password not changeable - If a user is flagged as this, then the password cannot be changed, and
the 'Change Password' button will be disabled.

x

For Groups:

–

Permanent - If a group is permanent, it can never be removed. When a permanent group is in con-
text, the 'Remove Group' button will be disabled.

–

Content Not Editable - If a group is flagged as this, then its group members cannot be changed
(neither added nor deleted). When a user belongs to a Content Not Editable group, this user can-
not be removed from the group (therefore, the group name will not show up when you press
'Remove From Group'). When a user does not belong to a Content Not Editable group, this user
cannot be added to the group (therefore, the group will not show up when you press 'Add To
Group').

DRAFT

REVIEW COPY

CTRL+SHIFT+F to search using Search Index (faster)

«
...
69
70
71
72
73
...
»

Summary of Contents for Optima XR220amx





























































































Reviews:

No comments

Related manuals for Optima XR220amx

Brand: Dairyland Pages: 21

Brand: Baker Pages: 82

Brand: RayLight Pages: 34

GAZELLE FREESTYLE

Brand: Gazelle Pages: 10

Brand: Latham Pages: 19

Brand: Samson Pages: 2

Brand: Ultimate Healthcare Pages: 2

Brand: Ultimate Healthcare Pages: 40

Brand: Vari Lite Pages: 14

Brand: Vaniman Pages: 3

Brand: Zodiac Pages: 2

Brand: Zimmer Pages: 46

Brand: VelociRAX Pages: 4

Brand: ABM Pages: 17

Brand: IBC Pages: 4

Brand: GE Pages: 2

Brand: Opvimus Pages: 50

Pro hunter 2525

Brand: SprotDog Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands