GE Optima XR220amx Operator'S Manual Download Page 6 | Manualshive

Page: 6 / 92

background image

Chapter 1: Introduction

Optima XR220amx X-Ray System

54400222-1EN

Rev 1 DRAFT 11092010

1-1

Operator Manual

© 2010 General Electric Company. All rights reserved.

Chapter 1: Introduction

The equipment is intended for use by qualified personnel only.

WARNING

United States Federal law restricts this device to sale by or on the order of a physi-
cian.

This Operator Manual should be kept with the equipment and be readily available at all times. It is impor-
tant for you to periodically review the procedures and safety precautions. It is important for you to read
and understand the contents of this manual before attempting to use this product.

This chapter explains the purpose and design of this Operator Manual. It provides information on the
organization, chapter format, and graphic conventions that identify the visual symbols used throughout
the manual.

Purpose Of This Manual

This manual is written for health care professionals (namely, the radiologic technologist) to provide the
necessary information relating to the proper operation of this system. The guide is intended to teach you
the system components and features necessary to use it to its maximum potential. It is not intended to
teach radiology or to make any type of clinical diagnosis.

Prerequisite Skills

This guide is not intended to teach radiology. It is necessary for you to have sufficient knowledge to com-
petently perform the various diagnostic imaging procedures within your modality. This knowledge is
gained through a variety of educational methods including clinical working experience, hospital based
programs, and as part of many college and university Radiologic Technology programs.

DRAFT

REVIEW COPY

CTRL+SHIFT+F to search using Search Index (faster)

«
...
4
5
6
7
8
...
»

Summary of Contents for Optima XR220amx





























































































Reviews:

No comments

Related manuals for Optima XR220amx

Brand: Bartscher Pages: 22

Brand: NORLUX Pages: 2

ImageQuant LAS 4000

Brand: GE Pages: 86

Brand: GE Pages: 160

Brand: GE Pages: 134

Brand: BACtrack Pages: 13

Brand: Badgematic Pages: 28

Brand: BACtrack Pages: 2

Brand: MADRIX Pages: 28

Brand: BACTcontrol Pages: 28

Brand: Faderfox Pages: 8

Brand: NEILPRYDE Pages: 55

Brand: HANYOUNGNUX Pages: 4

Brand: Park House Healthcare Pages: 6

Brand: J&M Pages: 33

Brand: PAS Systems International Pages: 24

MARK V Alcovisor

Brand: PAS Systems International Pages: 20

Brand: PARRY Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands