GE Optima XR220amx Operator'S Manual Download Page 38 | Manualshive

Page: 38 / 92

background image

Chapter 2: Safety and Regulatory

Optima XR220amx X-Ray System

54400222-1EN

Rev 1 DRAFT 11092010

2-27

Operator Manual

© 2010 General Electric Company. All rights reserved.

Pollution Control Label

The following product pollution control information is provided according to

SJ/T11364-2006 Marking for

Control of Pollution caused by Electronic Information Products

.

Figure 2-16

Pollution control symbol

This symbol indicates the product contains hazardous materials in excess of the limits established by the
Chinese standard SJ/T11363-2006 Requirements for Concentration Limits for Certain Hazardous Sub-
stances in Electronic Information Products. The number in the symbol is the Environment-friendly Use
Period (EFUP), which indicates the period during which the toxic or hazardous substances or elements
contained in electronic information products will not leak or mutate under normal operating conditions
so that the use of such electronic information products will not result in any severe environmental pollu-
tion, any bodily injury or damage to any assets. The unit of the period is Year.

In order to maintain the declared EFUP, the product shall be operated normally according to the instruc-
tions and environmental conditions as defined in the product manual, and periodic maintenance sched-
ules specified in Product Maintenance Procedures shall be followed strictly.

Consumables or certain parts may have their own label with an EFUP value less than the product. Peri-
odic replacement of those consumables or parts to maintain the declared EFUP shall be done in accor-
dance with the Product Maintenance Procedures.

This product must not be disposed of as unsorted municipal waste, and must be collected separately
and handled properly after decommissioning.

Dose Chart

Use the table below to compare film speed to dose values.

Table 2-18

Dose Chart

Expected receptor Default Dose (μGy) at 80 kVp

is less than:

Equivalent Film Speed

16.00 100

12.90 125

10.00 160

8.00 200

6.25 250

5.00 320

DRAFT

REVIEW COPY

CTRL+SHIFT+F to search using Search Index (faster)

«
...
36
37
38
39
40
...
»

Summary of Contents for Optima XR220amx





























































































Reviews:

No comments

Related manuals for Optima XR220amx

Brand: ABB Pages: 36

Brand: ABB Pages: 40

Brand: MacDon Pages: 89

Brand: Yates Pages: 2

Brand: JAC Pages: 100

Brand: VeEX Pages: 2

Brand: JB-Lighting Pages: 48

Brand: ADVANCED HOME CARE Pages: 16

Brand: JBL Pages: 38

Brand: JBSYSTEMS Light Pages: 32

Brand: JBM Pages: 12

Brand: unios Pages: 2

Brand: Maeda Pages: 276

Brand: Nellcor Pages: 161

OXIMAX N-600X Series

Brand: Nellcor Pages: 210

Brand: OAKWORKS Pages: 24

Brand: Taylor Pages: 41

Contrology Cadillac

Brand: Balanced Body Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands