GE MDS RCL220, Manual

Page: 45 / 79

RCL220_manual_v3-draft.doc
05-XXXXA01 Version 3 Draft Page 45 of 79 9/20/2016
LASTMFREQ3=<XXX.XXXXXX> Committed channel 3 M(Mobile) Frequency
Acceptable value range: 216-222 MHz Channels
LASTBFREQ4=<XXX.XXXXXX> Committed channel 4 B(Repeater) Frequency
Acceptable value range: 216-222 MHz Channels
LASTMFREQ4=<XXX.XXXXXX> Committed channel 3 M(Mobile) Frequency
Acceptable value range: 216-222 MHz Channels
CMD=<cmd> If set to 0, the command executes normally. If <cmd> is set to 1, the
command reports all settings in a format that may be copied into a configuration
script.
3.2.18 SLEEP
Usage: SLEEP {MODE=<mode>} {WAKE=<wake>} {DTRSENSE=<dtrsense>}
{HANGTIME=<hangtime>} {NOW=<now>} {CMD=<cmd>}
Description: Set / display the configuration of the radio's low power mode.
NOTE: CMD=1 short form response command is supported.
Access Level: Administrator
Optional Arguments:
MODE=<mode> Write Only for all users, starting at Administrator. This selects one
of the low power operating modes the remote will operate under.
NONE Normal mode
SLEEP Sleep enabled
SHUTDOWN Shutdown enabled
WAKE=<wake> Write Only for all users, starting at Administrator. This selects a
control option to activate(enter) or deactivate(exit) sleep or shutdown modes.
DTR Wake under DTR signal control
DATA Wake up on data
DTRSENSE=<dtrsense> Write Only for all users, starting at Administrator. DTR
sense setting.
LOW DTR Active LOW