GE MDS RCL220, Manual

Page: 41 / 79

RCL220_manual_v3-draft.doc
05-XXXXA01 Version 3 Draft Page 41 of 79 9/20/2016
IDLE no update in progress
CLI_REPROG Receiving reprogramming over the console
COM1_UPDATE Receiving reprogramming over the local serial por
RADIO_SEND_LISTEN Server awaiting reprogramming requests over the
air
RADIO_SEND_UPDATE Server sending reprogramming over the air
RADIO_REQUEST Requesting over the air reprogramming
RADIO_UPDATE Receiving over the air reprogramming
COM1_SEND Server sending reprogramming over the local seria
3.2.15 RADIO
Usage: RADIO {COMMITCHANS} {UNITADDR=<unitaddr>} {RSSI=} {MODE=<mode>}
{COORDMODE=<coordmode>} {TXKEY=<txkey>} {BFREQ1=<bfreq1>}
{MFREQ1=<mfreq1>} {BFREQ2=<bfreq2>} {MFREQ2=<mfreq2>} {BFREQ3=<bfreq3>}
{MFREQ3=} {BFREQ4=<bfreq4>} {MFREQ4=} {AUXTX=<auxtx>} {AUXRX=<auxrx>}
{TIMESLOT=<timeslot>} {YARDRSSI=<integer>} {TXSTART=<number>}
{SYNCTIMEOUT=<synctimeout>} {GROUPTIMEOUT=<grouptimeout>} {CMD=<cmd>}
Description: Set / display the radio configuration and status.
NOTE: CMD=1 short form response command is supported.
Access Level: Administrator
Optional Arguments:
COMMITCHANS Update ROR channels 3/4 with last RCL Sync
UNITADDR=<unitaddr> Read/ Write for all users, starting at Administrator.
Current Radio RCL Unit Address.
Acceptable value range: 1 - 2097151
MODE=<mode> Read/ Write, starting at Distributor. Current Radio Mode.
COORDMODE=<coordmode>
CCM Centralized Coordination Mode
DCM Distributed Coordination Mode
NORMAL Normal TDMA Mode <default>
MAINT Maintenance Mode, Low Power with no TDMA
CAL Calibration no TDMA Mode
TEST Test Mode, Low Power with TDMA
TRAFFIC Traffic TDMA Mode