GE MDS RCL220, Manual

Page: 30 / 79

RCL220_manual_v3-draft.doc
05-XXXXA01 Version 3 Draft Page 30 of 79 9/20/2016
3.2 Packaged or OEM Radio Command Reference
3.2.1 ALARM
Usage: ALARM {LEVEL} {HEX=}
Description: Displays the current alarm conditions by class. For each class, the
specific events that can cause the alarm are listed along with their descriptions.
NOTE: CMD=1 command not supported.
Access Level: Administrator
Optional Arguments:
LEVEL Read Only for all users listed above. One of the following:
ALL All Alarm Classes
INFORM Non-persistent Info
MINOR Minor Alarm
MAJOR Major Alarm
CRITICAL Critical Alarm
HEX= Read Only for all users listed above. Displays the Alarm Hex Bits-Codes. It
lists the hex bit codes for the current alarm condition by class. For each specific event
that causes an alarm, the corresponding bit is set. Event bits are TBD.
3.2.2 AUTH
Usage: AUTH {KEY=<key>} {PRODUCT=<product>} {TYPE=<type>} {COM2=<com2>}
{ETHERNET=<ethernet>} {MANAGEMENT=<management>} {SERIAL=<serial>}
{DON’T_CARE=<dont_care>} {RUN=<run>} {ENDPOINTS=<endpoints>}
{MOBILITY=<mobility>} {FACTDEF=<factdef>} {FSET=<fset>} {MAINTBAY=<maintbay>}
{CMD=<cmd>}
Description: Used to set / display the authorization key and a list of authorized
features.
NOTE: CMD=1 short form response command is supported.
Access Level: Administrator
Optional Arguments:
KEY=<key> Write Only for all users, starting at Administrator. Add (or display last)
authorization key, which is used to enable / disable software features. Only key for
"reset config to factory defaults" can be entered from "user" access level.