GE MDS iNET Series, Reference Manual

Page: 72 / 173

60 MDS iNET Series Reference Manual 05-2806A01, Rev. L
Invisible place holder
Figure 2-48. Point-to-Multipoint IP-to-Serial Application Diagram
Table 2-2. Serial Port Application Configuration
Transceiver Location Menu Item Setting
PC IP Protocol UDP
Remote IP Address 224.254.1.1—
Multicast Address
1
1. This address is an example only. Any Class D IP address
(224.0.0.0–239.255.255.255) will work.
Local IP Port 30011
Access Point (COM2)
2
2. Either COM port can be used, but they must be the same ones at
both ends of the link. Both COM ports can be used simultaneously for
two independent data channels.
3. Flow Control applies to the COM2 Port only.
N/A None required
Remote Units (COM2)
2 Enable Enabled
Baud Rate 2,400 (Example)
Serial Mode Custom
Flow Control
3 Hardware (Example)
IP Protocol UDP
Remote IP Address 192.168.0.1
Remote IP Port 30011
Local IP Port 30011
Local Multicast
Address 224.254.1.1 —
Multicast Address
1
192.168.0.3
192.168.0.4
EIA-232
Terminal
or Computer
RTU
RTU
RTU
EIA-232
EIA-232
EIA-232
192.168.0.10 192.168.0.1
192.168.0.2
Access Point
LA
N
COM
1
COM
2
PW
R
LIN
K
Remote
LA
N
COM
1
COM
2
PW
R
LIN
K
Remote
LA
N
COM
1
COM
2
PW
R
LIN
K
Remote