14
MDS iNET Series Reference Manual
05-2806A01, Rev. L
2.0 EMBEDDED MANAGEMENT SYSTEM
2.1
Introduction
The transceiver’s embedded management system is accessible through various data interfaces. These
include the
COM1 (
serial) port,
LAN (
Ethernet) port, and via SNMP. Essentially the same capabilities are
available through any of these paths.
For SNMP management, the transceiver is compatible with MDS
PulseNET
software. Refer to the docu-
mentation provided with the software. For support of other SNMP software, a set of MIB files is available
for download from the GE MDS Web site at
www.gedigitalenergy.com/Communications
. A brief sum-
mary of SNMP commands can be found at section 2.4.5 on page 36 of this manual.
The transceiver’s Management System and its functions are divided into the following menu groups:
• “Basic Device Information” on Page 22
• “Login Status Menu” on Page 27
• “Radio Configuration” on Page 40
• “Configuring the Serial Ports” on Page 49
• “Cyber Security Configuration” on Page 64
• “Performance Verification” on Page 69
• “Maintenance” on Page 82
Each of these sections has a focus that is reflected in its heading. The section you are now reading provides
information on connecting to the Management System, how to navigate through it, how it is structured, and
how to perform top-level configuration tasks. Figure 2-1 on the following page shows a top-level view of
the Management System (MS).
Summary of Contents for MDS iNET Series
Page 12: ...x MDS iNET Series Reference Manual 05 2806A01 Rev L...
Page 159: ...05 2806A01 Rev L MDS iNET Series Reference Manual 147 Figure A 22 EDS Wizard Completion Screen...
Page 165: ...05 2806A01 Rev L MDS iNET Series Reference Manual 153 NOTES...
Page 166: ...154 MDS iNET Series Reference Manual 05 2806A01 Rev L NOTES...
