108
MDS iNET Series Reference Manual
05-2806A01, Rev. L
Invisible place holder
Invisible place holder
.
Figure 4-3. Mounting Bracket Dimensions
DIN Rail Mounting Option
The unit may also be mounted with an optional 35mm DIN Rail Mounting Bracket (Part No. 03-4125A04).
Equipment cabinets and racks of recent design often employ this type of mounting. Once the DIN bracket
is mounted to the iNET case, it allows for quick installation and removal of the radio without the need for
tools of any kind. Figure 4-4 shows how the DIN Rail bracket attaches to the back of the unit’s case, and
how the entire unit attaches to the mounting rail.
Invisible place holder
Figure 4-4. DIN Rail Mounting of GE MDS Equipment
4.1.2 Site Selection
Suitable sites should provide:
• Protection from direct weather exposure
• A source of adequate and stable primary power
• Suitable entrances for antenna, interface or other required cabling
• Antenna location that provides as unobstructed a transmission path as possible in the direction of the
associated station
(
s
)
2.7
5
˝ (7
cm
)
7.25˝ (18.4 cm)
Step 1: Attach the bracket using the
Step 2: Snap the assembly onto the
DIN Rail. Removal is performed by
two screws provided. (Attach to
pulling down on the release tab.
the end opposite the connectors.)
Release Tab
Summary of Contents for MDS iNET Series
Page 12: ...x MDS iNET Series Reference Manual 05 2806A01 Rev L...
Page 159: ...05 2806A01 Rev L MDS iNET Series Reference Manual 147 Figure A 22 EDS Wizard Completion Screen...
Page 165: ...05 2806A01 Rev L MDS iNET Series Reference Manual 153 NOTES...
Page 166: ...154 MDS iNET Series Reference Manual 05 2806A01 Rev L NOTES...
