24
MDS iNET Series Reference Manual
05-2806A01, Rev. L
Figure 2-11. Configuration Summary Screen (iNET-II Remote)
•
Identification
—General radio information; frequency, hardware version, FPGA version, firmware
version, radio mode, redundancy status.
•
Radio
—Radio configuration; RF power, data rate (RM only), hop format, mobility status (RM only),
compression status, FPGA reset timer (AP only), beacon learning status (iNET-II Remote only), pri-
oritized AP (RM only).
•
Network
—Network configuration; IP address (static or DHCP), VLAN status, remote bridging status
(AP only), Spanning Tree Protocol status, Ethernet filtering status.
•
Connection
—Over-the-air link status; device status, encryption status, device auth status.
•
Services
—Active services on radio; SNMP status and version, Telnet status, SSH status,
HTTP/HTTPs status, DHCP server status, auto upgrade status.
2.3.2 Main Menu
The next screen, the Main Menu, is the entryway to all user-controllable features. The transceiver’s
Device
Name
appears at the top of this and all other screens as a reminder of the unit that is currently being con-
trolled
Figure 2-12. Main Menu
Summary of Contents for MDS iNET Series
Page 12: ...x MDS iNET Series Reference Manual 05 2806A01 Rev L...
Page 159: ...05 2806A01 Rev L MDS iNET Series Reference Manual 147 Figure A 22 EDS Wizard Completion Screen...
Page 165: ...05 2806A01 Rev L MDS iNET Series Reference Manual 153 NOTES...
Page 166: ...154 MDS iNET Series Reference Manual 05 2806A01 Rev L NOTES...
