116
MDS iNET Series Reference Manual
05-2806A01, Rev. L
2. View and record the
Wireless Packets Dropped
and
Received Error
rates.
(Main Menu>>Performance Information>>Packet Statistics>>Wireless Packet
Statistics)
This information will be used later.
3. Clear the
Wireless Pack
e
ts Statistics
history.
(Main Menu>>Performance Information>>Packet Statistics>>Wireless Packet Statistics>>Clear Wireless
Stats)
\
4. Read the RSSI level at the Remote.
(Main Menu>>Performance Information>>RSSI by Zone)
5. Optimize RSSI (less negative is better) by slowly adjusting the direction of the antenna.
Watch the RSSI indication for several seconds after making each adjustment so that the RSSI accu-
rately reflects any change in the link signal strength.
6. View the
Wireless Packets Dropped
and
Received Error
rates at the point of maximum RSSI level. They
should be the same or lower than the previous reading.
(Main Menu>>Performance Information>>Packet Statistics>>Wireless Packet Statistics)
If the RSSI peak results in an increase in the
Wireless Packets Dropped
and
Received Error
, the antenna
may be aimed at an undesired signal source. Try a different antenna orientation.
End of procedure
Summary of Contents for MDS iNET Series
Page 12: ...x MDS iNET Series Reference Manual 05 2806A01 Rev L...
Page 159: ...05 2806A01 Rev L MDS iNET Series Reference Manual 147 Figure A 22 EDS Wizard Completion Screen...
Page 165: ...05 2806A01 Rev L MDS iNET Series Reference Manual 153 NOTES...
Page 166: ...154 MDS iNET Series Reference Manual 05 2806A01 Rev L NOTES...
