GE Marquette 418793-001 Service Manual Download Page 2 | Manualshive

Page: 2 / 124

background image

T-2

APEX Telemetry Transmitter

Revision D

401566-166

15 June1999

NOTE: Due to continuing product innovation, specifications in this manual are

subject to change without notice.

Trademarks

Trademarked names appear throughout this document. Rather than list
the names and entities that own the trademarks or insert a trademark
symbol with each mention of the trademarked name, the publisher states
that it is using the names only for editorial purposes and to the benefit of
the trademark owner with no intention of improperly using that
trademark.

900 SC, ACCUSKETCH, AccuVision, APEX, AQUA-KNOT, ARCHIVIST, Autoseq, BABY
MAC, C Qwik Connect, CardioServ, CardioSmart, CardioSys, CardioWindow, CASE, CD
TELEMETRY, CENTRA, CHART GUARD, CINE 35, CORO, COROLAN,
COROMETRICS, Corometrics Sensor Tip, CRG PLUS, DASH, Digistore, Digital DATAQ,
E for M, EAGLE, Event-Link, FMS 101B, FMS 111, HELLIGE, IMAGE STORE,
INTELLIMOTION, IQA, LASER SXP, MAC, MAC-LAB, MACTRODE, MARQUETTE,
MARQUETTE MAC, MARQUETTE MEDICAL SYSTEMS, MARQUETTE UNITY
NETWORK, MARS, MAX, MEDITEL, MEI, MEI in the circle logo, MEMOPORT,
MEMOPORT C, MINISTORE, MINNOWS, Monarch 8000, MULTI-LINK,
MULTISCRIPTOR, MUSE, MUSE CV, Neo-Trak, NEUROSCRIPT, OnlineABG,
OXYMONITOR, Pres-R-Cuff, PRESSURE-SCRIBE, QMI, QS, Quantitative Medicine,
Quantitative Sentinel, RAC RAMS, RSVP, SAM, SEER, SILVERTRACE, SOLAR,
SOLARVIEW, Spectra 400, Spectra-Overview, Spectra-Tel, ST GUARD, TRAM,
TRAM-NET, TRAM-RAC, TRAMSCOPE, TRIM KNOB, Trimline, UNION STATION,
UNITY logo, UNITY NETWORK, Vari-X, Vari-X Cardiomatic, VariCath, VARIDEX, VAS,
and Vision Care Filter are trademarks of GE Marquette Medical Systems, Inc. registered in
the United States Patent and Trademark Office.

12SL, 15SL, Access, AccuSpeak, ADVANTAGE, BAM, BODYTRODE, Cardiomatic,
CardioSpeak, CD TELEMETRY

®

-LAN, CENTRALSCOPE, Corolation, EDIC, EK-Pro,

Event-Link Cirrus, Event-Link Cumulus, Event-Link Nimbus, HI-RES, ICMMS, IMAGE
VAULT, IMPACT.wf, INTER-LEAD, IQA, LIFEWATCH, Managed Use, MARQUETTE
PRISM, MARQUETTE

®

RESPONDER, MENTOR, MicroSmart, MMS, MRT, MUSE

CardioWindow, NST PRO, NAUTILUS, O

2

SENSOR, Octanet, OMRS, PHi-Res, Premium,

Prism, QUIK CONNECT V, QUICK CONNECT, QT Guard, SMART-PAC, SMARTLOOK,
Spiral Lok, Sweetheart, UNITY, Universal, Waterfall, and Walkmom are trademarks of GE
Marquette Medical Systems, Inc.

© GE Marquette Medical Systems, Inc., 1999. All rights reserved.

GE Marquette Medical Systems, Inc.
8200 W. Tower Ave.
Milwaukee, WI 53223 USA

Tel:

414.355.5000
800.558.5120 (USA only)

Fax:

414.355.3790

Marquette Hellige GmbH
Postfach 60 02 65
D-79032 Freiburg
Germany

Tel:

49.761.45.43.0

Fax:

49.761.45.43.233

«
1
2
3
4
...
»

Summary of Contents for Marquette 418793-001





























































































































Reviews:

No comments

Related manuals for Marquette 418793-001

Brand: Pall Pages: 51

Brand: ZAMST Pages: 21

Brand: Varec Pages: 74

Brand: Halyard Pages: 84

Brand: PAIDI Pages: 48

FX-ARM CONTROLLER

Brand: Magicfx Pages: 16

Brand: Above All Pages: 4

Brand: LANGER EMV-Technik Pages: 25

Electric Clamshell CSE12-208VCD

Brand: Lang Pages: 16

Brand: laerdal Pages: 9

Brand: Magma Pages: 16

Brand: Naked Pages: 36

Brand: Major tech Pages: 12

Monolith NT.115

Brand: Nano Temper Pages: 24

SCAFFOLDBENCH I-CISRL

Brand: MetalTech Pages: 16

Brand: K-SPORT Pages: 5

Brand: Brillion Pages: 56

Brand: Vahle Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands