GE LOGIQ S8, Service Manual

Page: 104 / 418

GE H
EALTHCARE
PROPRIETARY TO GE
D
IRECTION
5394227, 12 LOGIQ S8/LOGIQ E8 S
ERVICE
M
ANUAL
3 - 26 Section 3-7 - Power On/Off
To add users:
1.) Navigate to
Utility > Admin > Users
.
2.) Select
Add
and enter the user details.
NOTE: You will need to edit the ID field from NewUser default. Do not push “Add” again until adding
another user.
DO NOT include the following characters in a user ID: slash (/), dash (-), asterisk (*), question mark (?),
an underscore (_), ampersand (&), or blank spaces. Also, DO NOT set up Users with the same
initials/signifier.
3.) Enter password using the defined policies.
4.) If needed, select
User Must Change Password
. The user will be prompted to change the
password on the next logon.
5.) Under
Group Membership
, select the groups for the new user.
NOTE: The user password is system specific. If the user needs to access multiple systems the
password will need to be entered manually on each system.
Figure 3-15 Users Window (R4.2.5x screen)
The system administrator can specify whether the users account is Active, Blocked or requires a
password change.
The system administrator may also remove a user. Highlight the user Id in the list, select
Remove
to
mark the user as inactive and then select
Remove
again to remove user from the list.