GE Innova IGS 6, Preinstallation Manual

Page: 38 / 194

NOTE
(2) Special Humidity Instructions: The following parts can be can be shipped in standard
shipment conditions with the requirement that on arrival to installation site, and before
supplying power to these parts, they shall be kept in an environmental relative humidity
equal or lower than their specified capability, and that’s for a minimum of 48 hours.
• 3 kVA UPS 110 V & 220 V, 1 kVA UPS (Maximum specified relative humidity capability =
90%)
• LDM Monitor (Maximum specified relative humidity capability = 90%)
• CVI Injector (Maximum specified relative humidity capability = 85%)
• Diamentor (Maximum specified relative humidity capability = 80%)
• 1MP MX191 LCD Monitor (Maximum specified relative humidity capability = 80%)
Table 1-2 Atmospheric Pressure - Storage and transport
SUB-SYSTEM COMPONENTS ATMOSPHERIC PRESSURE (hPa)
MIN MAX
Frontal Positioner 525 1013
Lateral Positioner 525 1013
Omega Table 48 1220
TSUI (TSSC, Smart box, Smart handle, TPD) 500 1010
Footswitch 500 1060
Monitor LCD Eizo 540 1053
Monitor LDM 200 1050
Cabinets C1 Frt, C1 Lat, C2 500 1060
UPS 3 kVA, 1 kVA 697 1130
Power Distribution Box (PDB) CE 500 1060
Power Distribution Box (PDB) UL 500 1060
UL Fluoro UPS cabinet (*) 500 1013
CE Fluoro UPS cabinet (*) 500 1013
LDM cabinet LD core 700 1060
Detector conditioner 120 1060
Tube chiller Coolix 4100 500 1060
VCIM 525 1013
General Requirements
5750182-1EN 3
Innova
TM
IGS 6
27