Diagnostics
Service Mode
The control must be in the idle state (display lit but not in a cycle) to enter Service Mode.
Keys are labeled di
ff
erently on certain models. Press the following key sequence that matches the keys on
the model being serviced.
Service Mode Entry
Models with
Ext Rinse
key:
Press and release the
Ext Rinse
key, then press and release the
Delay Wash
key, then press and release
the
Ext Rinse
key, then press and release the
Delay Wash
key.
Models with
Rinse
key:
Press and release the
Rinse
key , then press and release the
Delay Wash
key, then press and release the
Rinse
key, then press and release the
Delay Wash
key.
Navigate Service Mode
• Rotate the cycle select knob CW to increase the test number.
• Rotate the cycle select knob CCW to decrease the test number.
• Press
the
Start
key to enter a test.
• Turn the cycle select knob to exit the test.
Service Mode Exit
Press the
Power
key or disconnect power to unit. Service mode will automatically be exited after 30
minutes of inactivity.
