GE FL000090, Service Manual

Page: 203 / 740

GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1 V
IVID
I
N AND
V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 3 - System Setup 3-135
The Search/Create Patient dialog box opens.
2.) Type the patient’s Last Name and ID in the appropriate fields (see Figure 3-142 ).
3.) Select the Dataflow you intend to use for this patient’s information (in this case, select
Local
Archive – Int HD/eVue
as shown in Figure 3-142 ).
4.) Using the soft key buttons, select CREATE PATIENT.
5.) Now start scanning. Each image you would like to store press the STORE button.
A few seconds after the Store button is pressed, images will be transferred into the remote
computer (which was previously set as the destination - refer to
Figure 3-141 on page 3-133 ).
6.) To proceed, follow to the instructions as described for Using MPEGVue Viewer on a Remote PC on
page 3-152 .
Figure 3-142 Search/Create Patient Dialog Box