GE EVT-Pro 2.0, Operation And Technical Manual, Page: 53 / 60

SECTION 39
EVT PRO 2.0
®
ANNUAL CALIBRATION
All calibrations are completed by Ventil at one of the addresses located below. Select
the one which is closest to your facility. It is the responsibility of the GTC to ship the
necessary items for annual calibration. For calibration purposes and to reduce shipping
costs the only items required for calibration will be the transducers or load sensors used
on the EVT Pro. There are four of them and all four will need to be returned.
When the
calibration is completed both a paper copy and an electronic one will be provided for the
owner.
EVT PRO 2.0 ® SERVICE REQUESTS AND KEY CONTACTS
SECTION 40
EVT PRO 2.0
®
Operations and Technical Manual (Rev 1.0
– 2016)
NOT FOR COPY OR DISTRIBUTION Page 49
With the release of software 5.2.10 version Ventil has added key Service contacts on line
to your
EVT PRO 2.0
®
device. This will allow you to easily find your contacts should any
issues arise. To access from the Main Menu screen simply click on the EVT Service
Request Option as shown below in Figure 35.1.
EVT Service Request option
Ventil USA – 5 to 7 day turn around time + shipping, (if Venil NL – 2 days + shipping.)