GE EVT-Pro 2.0, Operation And Technical Manual, Page: 16 / 60

SECTION 8
EVT PRO 2.0
®
BRACKET CASE
The EVT PRO 2.0
®
Bracket Case is a Pelican style case which houses the EVT PRO 2.0
®
Bracket, Hydraulic Lifting Cylinders 2 and 4, load cell claw assemblies, and various other
items. Please refer to Figure 8.1 below for part identification.
Figure 8.1
– Bracket Case
50 kN Hydraulic Lift
Cylinder #4
EVT PRO 2.0
®
Bracket Assembly
10 kN Hydraulic Lift
Cylinder #2 (Shown
mounted on Bracket)
Bracket Extension (2)
Load Cell Claw # 3
Load Cell Claw # 1
Load Cell Claw # 2
SECTION 9
EVT PRO 2.0
®
BRACKET ASSEMBLY
The EVT PRO 2.0
®
Bracket assembly is vastly improved over previous versions. It utilizes
turn screw micro height adjustment which allows for a minimum height of just 13
inches. This is well below the 19 inch PRV overhead clearance requirement as
stipulated by NBIC Section 3, API RP 520, and ASME Sec 1, VII, and VIII. The
mounting adapter to the PRV spindle has been improved to provide quick and universal
mating, and the Bracket Pin lanyards have been eliminated and replaced with pins which
have slot and groove tracks with mechanical stops.
EVT PRO 2.0
®
Operations and Technical Manual (Rev 1.0
– 2016)
NOT FOR COPY OR DISTRIBUTION Page 12