GE Druck ADTS 2 Series, User Manual

Page: 15 / 70

3 Druck ADTS 2XX User Manual
K0451 Issue No. 1
2 INSTALLATION
2.1 Packaging
• On receipt of the ADTS 2XX check the contents of the packaging against the following lists:
S
PECIAL
R
EQUEST
Please keep the special packing box so that the ADTS 2XX can be safely shipped for calibration or repair.
Packaging List - ADTS 2XX
i) Air Data Test System ADTS 2XX
ii) Power supply cable 5m
iii) Accessory bag
a)
Hose, 1m, blue, AN4 - AN4
b) Hose, 1m, red, AN6 - AN6
c) Hose, 1m, black, AN6 - AN6
d) Cable, communications
e) Spare fuses (4 off)
f) O-ring 5 i/d x 1 (20 off)
g) O-ring 8 i/d x 1 (20 off)
h) User Manual (this publication), Calibration Manual K0425 and Quick Reference Guide
K0448
iv) Advanced Hand Terminal
a)
CD containing file transfer and sample scripts
b) Power supply adaptor and cables
c) Cable external communications
d) AHT User Manual K0418
2.2 Packing for Storage or Transportation
To store the tester or to return the tester for calibration or repair carry out the following procedures:
1. Pack the tester as detailed in the following procedure.
2. To return the tester for calibration or repair complete the return goods procedure.
Procedure
• The tester should be at zero/ambient pressure. Disconnect the hose assemblies and stow in
the accessory bag.
• Switch OFF and disconnect from the electrical power supply.
• Close and latch the lid to the tester.
• The power supply cable, should be placed in the original packing material.
• Place the tester in the original special packing box or appropriate transport container.
• Mark carton “FRAGILE” on all sides, top, and bottom of the container.
• To return the tester for calibration or repair complete the return goods procedure as detailed in 2.3.