GE DINAMAP ProCare, Service Manual

Page: 127 / 134

Revision C DINAMAP
®
ProCare Monitor Service Manual C-13
2009381-001
Electromagnetic Compatibility (EMC): Electromagnetic Compatibility (EMC): ILC-1931
Electromagnetic Compatibility (EMC): ILC-1931
Changes or modifications to this system not expressly approved by GE Medical
Systems can cause EMC issues with this or other equipment. This system is
designed and tested to comply with applicable regulation regarding EMC and
must be installed and put into service according to the EMC information stated
in this appendix.
WARNINGS
Use of portable phones or other radio frequency (RF) emitting
equipment near the system may cause unexpected or adverse
operation.
The equipment or system should not be used adjacent to, or
stacked with, other equipment. If adjacent or stacked use is
necessary, the equipment or system should be tested to verify
normal operation in the configuration in which it is being used.
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The ILC-1931 is intended for use in the electromagnetic environment specified
below. It is the responsibility of the customer or user to assure that the ILC-1931
is used in such an environment.
Emissions Test Compliance Electromagnetic Environment – Guidance
RF Emissions
EN 55011 Group 1 The equipment uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
RF Emissions
EN 55011 Class A
Harmonic Emissions
EN 61000-3-2 Not Applicable The equipment is suitable for use in all establishments other than
domestic and those directly connected to the public low-voltage
power supply network that supplies buildings used for domestic
purposes.
Voltage Fluctuations/
Flicker Emissions
EN 61000-3-3 Not Applicable