3.6 SNMP SECTION
The SNMP section deals with SNMP and trap configuration.
3.6.1 SNMP settings page
The most relevant SNMP settings are the following:
Parameter Name
Description
Port Number
Set SNMP server listening port. Default port is 161.
Get Community
Defines the community name for receiving SNMP information (GET). The get
community name controls access to the SNMP Agent – the community in the
request must match the
getcommunity
parameter.
The default value is
public
.
Set Community
Defines the community name for writing SNMP information (SET). The set
community name controls access to the SNMP Agent – the community in the
request must match the
setcommunity
parameter. The default value is
private
.
3.6.2 Trap settings page
This page allows to configure up to 20 recipients of SNMP traps. The most relevant settings are the
following:
Parameter Name
Description
Trap destination
IP-address of the trap target
Community
Community name (optional – default is
public
)
V2
Controls SNMP trap version:
If unchecked, v1 traps are sent (default)
If checked, V2 traps are sent
Port
Port to which the trap will be sent (optional – default
162
)
3.6.3 Alarm notification page
This page is used to configure the alarm notification via trap and/or e-mail. Every alarm is listed, and the
user may enable the notification via trap and/or e-mail upon alarm (de)activation.
Further to this, alarm handling can be enabled/disabled through the
Enable
checkbox. When disabled,
an alarm occurrence is totally filtered – the alarm will never appear active, it will not be reported by any
mean and it will not be logged.
Modifications reserved
Page 35/69
OPM_CNT_SNM_BAS_CRD_1GB_V014.doc
Operating Manual
SNMP/Web Adapter
