GE D20MX, Instruction Manual

Page: 88 / 168

88 GE INFORMATION D20MX INSTRUCTION MANUAL
CHAPTER 5: CONFIGURING THE SOFTWARE
License created from : D400 Utilities V1.0.1
License Version : 01.000
Application License Status
==============================================================
001 : D2X Classic Applications Trial Disabled
002 : Advanced Automation Applications Trial Enabled
Unlock an application
group
To unlock an application group, an unlock code must be purchased from GE. Please
contact Customer Service for the unlock code.
Customer Service asks for the 'Hardware Identifier' of the D20MX that is to have the
application group unlocked. This is a unique identifier for each D20MX and cannot be used
with any other D20MX (that is, the license is non-transferrable).
View the hardware
identifier
Use the D20M Shell command swlic-info to view the Hardware Identifier.
For example:
D20M>swlic-info
System Information
License Information Utility V01.000
====================================================================
Target Unit : D20MX
Hardware Identifier : 303064303163306237323461
License File : /tffs0/swLicense/license.key: Good
Customer Service sends you either:
•
An unlock code
• An new license file (license.key)
• Or a batch file (batch.lic) which can be used on multiple D20MXs
Unlock code
If Customer Service send an unlock code, use the D20M Shell command swlic-unlock -l
<unlock code> to unlock the application group.
For example:
D20M>swlic-unlock -l 6E62385170303537533061626B66706643673D3D
Unlock Key is Valid
Info : License for '001' and been unlocked
This unlocks the application group 001.
License file
If Customer Service sends a license file (license.key), use a SCP (Secure Copy) application,
such as WinSCP, to copy the license file over the network to the /ram directory on the
D20MX.
Alternatively, use the D20M Shell
RZ command to download the license file via Z-Modem
through the console port. The RZ command automatically places the file in the /ram
directory.
NOTE
The file must be named license.key .
Use the D20M Shell command CL (Copy License) to process the license file. This command
copies the license file to the correct location on the D20MX, and if there are no errors, the
D20MX automatically restarts.