CyberDome Series Installation Manual
Appendix C: 8-inch Pendant-mount Housing Installation
51
A06-8SG0/B/April2006/1033921C
Step 12)
Reinstall the bracket’s cover.
Step 13)
Proceed to
RS422 Termination
on page 31.
Step 10)
Insert the interconnect cable into the RJ45 jack in the upper housing (as shown in
Figure 73
)
.
Figure 73: Inserting the Interconnect Cable
Figure 74: Connecting the Cables to the Interface Module
CAUTION!
If the power and RS422 cables are reversed in step 11 (below), the CyberDome will be damaged.
Step 11)
Connect the prepared cables to the interface module, and then insert the inter-
connect cable from the CyberDome into the RJ45 jack in the interface module (as
shown in
Figure 74
).