GE ADTS542F User Manual Download

Page: 60 / 153

ETTINGS

[EN] English

K0553 Revision D

* This menu and its submenus are only available when the On/Standby toggle switch is set to On.

** The configuration can only be changed when the On/Standby toggle switch is set to Standby.

Settings menu overview

Intensity

Adjusts the brightness of the screen displays.

Theme

Changes the screen view from a dark background with white text to a light background with
black text for bright sunlight use.

Volume

Adjusts the volume of the audible indications.

ADTS settings

Opens a sub-menu containing eleven items:

- Auto leak recovery

Auto leak recovery automatically regains control if the leak rate becomes too high for any of the

control channels. Auto leak operates at pre-set rates of 3000ft/min and 600knots/min.

To turn auto leak recovery

and

Off

Tap the auto leak recovery panel inside the white box. When auto leak recovery is On, a
“tick” appears inside the box. If no “tick” is visible, auto leak recovery is Off.

Regional settings

Date
- Date format

Time
- Time format

Language

Area of use

Screen rotation

Bluetooth® Autoconnect

Settings menu overview

Summary of Contents for ADTS542F


























































































































































Search results

Summary of Contents for ADTS542F

Reviews:

Related manuals for ADTS542F

Brands by name

Popular brands

GE ADTS542F, User Manual

Search results

Summary of Contents for ADTS542F

Reviews:

Related manuals for ADTS542F

Brands by name

Popular brands