GE ADTS542F, User Manual

Page: 68 / 153

S
ETTINGS
[EN] English 59 K0553 Revision D
Delete limits
When selected, this function requires you to enter a PIN code. To delete limits:
1) Tap Delete limits , a numbered keypad is displayed.
2) Enter your PIN number and tap the “tick” icon. The Delete limits panel opens. Taping the
“cross” icon closes the numbered keypad without making any change.
3) On the Delete limits panel, tap the panel for the custom limits to be deleted (User 1 to 5).
4) The message Are you sure you want to delete this Limits Set? is displayed.
5) Tap Yes . The previously selected User 1 to 5 limits panel is deleted. Taping No returns you
to the Delete limits panel without making any changes.
6) If required, repeat this procedure to delete other limit sets (User 1 to 5).
7) If required, you can now create new Limit sets to replace deleted limit sets, see Create new
limits above.
8) Tap the Back/Return button to return to the ADTS Settings menu.
- Auto zero (only in measure mode)
When auto zero is On (default), the Pt and Ps sensors are automatically aligned using the Ps
channel as the reference channel.
To turn auto zero On and Off:
1) Tap the auto zero panel inside the white box. When auto zero is On, a “tick” appears inside
the box. If no “tick” is visible, auto zero is Off.
- Change supervisor PIN
When selected, this function allows you to enter a new PIN code. To change your PIN:
1) Tap the Change supervisor PIN panel. A numbered keypad opens and the text Enter
Supervisor Pin is displayed.
2) Enter your current PIN. The text “New PIN” is displayed. Taping the “Cross” icon cancels the
action and closes the numbered keypad without changing the PIN.
3) Enter the new PIN number and tap the “tick” icon. You will be asked to confirm the change.
4) Enter the new PIN again and tap the “tick” icon again. The numbered keypad closes and the
new PIN is now active.
5) You will be prompted to remember the new PIN.
6) Tap OK . The new PIN is now active and the Change supervisor PIN panel closes.