manualshive.com logo in svg

GE ADTS542F, User Manual

Share
Download
GE ADTS542F User Manual Download Page 125

B

ATTERY

 

CARE

 

AND

 

MAINTENANCE

K0553 Revision D

122

[EN] English

Battery care and maintenance

ADTS Touch battery pack

The battery unit contains a Lithium Ion battery which requires no user maintenance.

Prolonged exposure to temperature extremes may significantly reduce battery lifetime. For 

maximum lifetime, avoid prolonged periods where the battery is exposed to temperatures 

outside the range -30°C to +45°C.

The recommended storage temperature range is 5°C to 21°C (41°F to 98.8°F).

The battery is removable. The manufacturer makes the following safety recommendations. The 
User should not:

•

Short circuit the battery.

•

Immerse the battery in any liquid.

•

Disassemble or deform the battery.

•

Expose to, or dispose of the battery in a fire.

•

Subject the battery to excessive physical shock or vibration outside the specified limits for 

the ADTS.

•

Use a battery that appears to have suffered abuse.

The battery unit is sealed for life, so leakage of electrolyte is not expected. If leakage of electro-

lyte from the battery is observed, stop using the battery immediately and avoid contact with the 

electrolyte. If skin or clothes come into contact with the electrolyte, wash immediately with soap 
and water. If electrolyte comes into contact with the eyes, wash the eyes thoroughly with water 

and consult a Doctor immediately.

Summary of Contents for ADTS542F


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands