manualshive.com logo in svg

GE 5418099, Service Manual

Share
Download
GE 5418099 Service Manual Download Page 342

GE H

EALTHCARE

D

IRECTION

 5394227, 12

 

LOGIQ S8/LOGIQ E8 S

ERVICE

M

ANUAL

7 - 72

Section 7-7 - Troubleshooting Trees, Instructions and Tech Tips

7-7-5-1

Cleaning the trackball

To keep the right response of the trackball, frequently clean the trackball with a disposable soft, dry, lint 
free cloth; e.g. lens cleaner cloth, in accordance with procedure below.

1.)

Remove the ball from the operation panel.

2.)

Clean the crane ring and ball.

3.)

Clean the aiming balls, the protection covers over the X/Y position-sensor. Carefully remove the 
smudges to avoid scratching to the protections when cleaning around the sensors.

4.)

After cleaning, install it back into the operation-panel and confirm that the trackball moves 
smoothly.

Protection Cover

Five Aiming
Balls

Summary of Contents for 5418099



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands