GE 5418099, Service Manual

Page: 215 / 418

GE H
EALTHCARE
PROPRIETARY TO GE
D
IRECTION
5394227, 12 LOGIQ S8/LOGIQ E8 S
ERVICE
M
ANUAL
Section 4-4 - Functional Checks 4 - 39
4-4-17 Peripheral Checks
4-4-17-1 Hardware DVR Test (if equipped on R1.x.x or R2.x.x)
Required: Blank [DVD+RW] media.
1.) Make sure the tab menu of “
Video
” is found on the right-most touch panel tab. If not found, go to
“Utility” -> “Application” -> “Setting” and check “Show video Tab”.
2.) Insert the media. Go to DVR Touch Panel menu.
3.) For R1 system, press
REC-Standby
to go stand-by.
4.) Start Recording. Perform image scanning including Doppler sound.
5.) Stop Recording.
6.) Exit from stand-by.
7.) Play.
8.) Verify that Recorded image and sound can be played back.
NOTE: For more information about DVR, refer to the latest revision of the Basic User Manual, Chapter 9.
4-4-17-2 Software DVR Test (if equipped on R3.0.0 and later)
Required: Blank [DVD+RW] media.
1.) Make sure the tab menu of “
Video
” is found on the right-most touch panel tab. If not found, go to
“Utility” -> “Application” -> “Setting” and check “Show video Tab”.
2.) Go to “Utility” -> “System” -> “Peripherals” and confirm “DVD” is set as DVR media. If not, set it and
restart the system.
3.) Insert the media. Go to DVR Touch Panel menu.
4.) Start Recording. Perform image scanning including Doppler sound.
5.) Stop Recording.
6.) Play.
7.) Verify that Recorded image and sound can be played back.
NOTE: For more information about DVR, refer to the latest revision of the Basic User Manual, Chapter 9.
4-4-17-3 Black and White Printer Test
1.) Print an image by pressing
P
button associated with BW Printer. (P key should be configured
correctly.)
2.) Verify that image can be printed.
3.) Verify that printed image has no distortion as compared the image on screen.
4-4-17-4 Color Printer Test
1.) Print an image by pressing
P
button associated with Color Printer. (P key should be configured
correctly.)
2.) Verify that image can be printed.
3.) Verify that printed image has no distortion as compared the image on screen.
4-4-17-5 CD/DVD Read/Write Test
1.) Insert Blank CD/DVD Media into Optical Drive.
2.) Go to Utility -> System -> Backup Restore. Select “CD/DVD” in “Media” list.
3.) Select “User Define Configuration checkbox” in Backup and press
Backup
.
4.) Start backup into Media by pressing
OK
Button.
5.) Verify that “Finished OK” message appears.