SymSafe/SymSafe Pro
User Manual
28
7. Select the
IP advanced menu.
8. Enter the camera’s
Streaming/Multicast address
into the
Multicast
field. This address always starts
with the number 230. (230.xxx.xxx.xxx)
Example
•
The DVR
IP address
is 168.125.115.010
•
The Camera
IP address
is 168.125.115.025 (both in the camera itself and SymSafe camera menu)
•
The
Multicast/Streaming
address on both the camera and SymSafe should be 230.125.115.025
•
If you have a second IP camera: The Camera
IP Address
could be 168.125.115.026 and the
Multicast/
Streaming
address would still be 230.125.115.025
How to setup a KTD-405 keypad to work with the SymSafe
To setup and connect a KTD-405 keypad and a SymSafe follow the steps below. You will need to refer to the
KTD-405 user manual (part number 1036547D).
1. Connect a pair of wires from the KTD-405 I/O box to the SymSafe Bus 1/485 port.
•
KTD-405 I/O box pin RS485 (A) to SymSafe Serial I/O Bus 1/485 pin 1 (+).
•
KTD-405 I/O box pin RS485 (B) to SymSafe Serial I/O Bus 1/485 pin 2 (-).
2. Verify the serial communication settings on Bus 1 of the SymSafe;
a.
Go to the
System/Serial Communication
Bus 1 menu and verify the following:
•
Bus 1 Type: RS-0485
•
Protocol: Kalatel
•
Baud Rate: 9600
•
DVR Addr: 1
3. Enter
Zone mode
operation on the KTD405 keypad. Please refer to your KTD-405 manual for more
detailed information. Access the KTD-405 zone mode by doing:
a.
Hold down the
Enter
key.
b. Enter programming code: 5-7-9-seq.
c.
Change operating mode from
Digiplex
to
Zone
mode by the joystick up/down.
d. Press the
Fast Forward
button.
e.
Hold down the
Seq
button to exit the menu.
f.
You should be in
Zone
mode.
g. Press the
Zone
button, then the number
1.
This will initiate a connection between the SymSafe and
the KTD-405 keypad.
How to set the IP camera option to a keypad button
The KTD-405 and SymSafe should be connected and operational.
Summary of Contents for SymSafe
