GE Security SymSafe User Manual Download Page 40

Page: 40 / 154

SymSafe/SymSafe Pro

User Manual

Fast reverse button: In playback mode, plays video in reverse. Touch again to increase speed.

Play forward button: Plays video forward at 1x speed.

Play reverse button: Plays video in reverse at 1x speed.

Can be configured to display selected IP camera.

Search button: Displays the Search and Disk Analysis screens.

Joystick

In setup mode, scrolls up, down, left. right in menus. In play or pause modes, rotate clockwise or counter
clockwise to jog video forward or reverse.

In setup mode, emulates the Enter button. Toggles in and out of editable fields.

esc

Emulates the Menu button. Push to enter OSD mode or to discard changes in menus.

Alarm

Emulates the Alarm button. Push to acknowledge all alarms.

View

Emulates the Display button. Push to cycle through available multiscreens. Use with the 2-5 number
buttons.

Seq

Emulates the Sequence button.

Mon

Use with 0 and 1 number buttons to select Monitor A or Monitor B.

Zone

Zone +

+ 1-16 (number buttons) +

emulates Camera buttons.

Table 12. KTD-405 to SymSafe front panel mapping

KTD-405 Keypad

SymSafe front panel function

Summary of Contents for SymSafe



























































































































































Search results

Summary of Contents for SymSafe

Reviews:

Related manuals for SymSafe

Brands by name

Popular brands

GE Security SymSafe, User Manual

Search results

Summary of Contents for SymSafe

Reviews:

Related manuals for SymSafe

Brands by name

Popular brands