SymSafe/SymSafe Pro
User Manual
62
IP Advanced
Use this menu to configure these advanced network settings.
Consult with a qualified network
administrator or IT professional to configure these settings.
Figure 41. The Network/IP Advanced menu
Muticast Video Streaming Overview
Video streaming is a new concept to many, so we have included the following overview. A certain level of IP
network knowledge is required to properly set up video streaming
Table 27. The Network/IP Advanced menu options
Menu Options
Settings
MTU
1514 is the default. Sets the maximum TCP packet size.
Net Limit
None, 0-3999 Kbps.
Listen Port
1024 is the default. This is the port that the SymSafe uses to listen for streaming commands
Streaming Protocol
UDP, TCP
Multicast IP address
230.0.0.0. is the default. This must match between devices.
Streaming Port
8090 is the default setting for the stream.
Sender Control
Enable or Disable. Must be enable to send IP video.
Sender Port
8092 is the default setting. If you change this port here make sure you also change to match
on the Receiver device.
Receiver Control
Enable or Disable. Must be enabled to receive IP video.
Receiver Port
8092 is the default setting. If you change this port here make sure you also change to match
on the Sender device.
Summary of Contents for SymSafe
