GE Security SymSafe, User Manual

Page: 87 / 154

Chapter 4
Programming the SymSafe
77
Table 37. The System/Disk Tools men options
Menu Options Settings
Delete Select and press the enter button to delete all data on the hard drives. Requires PIN number.
Undelete Select and press the enter button to undelete all data on the hard drives. Only works after a
delete command. Requires PIN number.
Erase Select and press the enter button to erase all data on the hard drives. Requires PIN number.
Data is not recoverable with the Undelete command.
Unprotect/Protect All, By Clip, By Range (Protects/unprotects selections from deletion on hard disk) *Pro version
only
Overwrite Continuous:
• Recording always starts at end of last recording.
• The unit overwrites all previously recorded data.
• The unit overwrites newly recorded data (data from the current record session).
• Unit never stops recording.
Write Once:
• Recording always starts at end of last recording.
• The unit overwrites all previously recorded data.
• Recording stops before the unit overwrites any of the newly recorded data (data from the
current record session).
• When the end of the disk is reached, the unit displays an on-screen message indicating
that the disk is full, and the unit has stopped recording. User must acknowledge the on-
screen message by clicking the Enter button.
• The unit will continue recording again when the user clicks the Record button.
No Overwrite:
• Recording always starts at end of last recording.
• Recording stops when end of disk is reached (when disk is full).
• When the end of the disk is reached, the unit displays an on-screen message indicating
that the disk is full, and the unit has stopped recording. User must acknowledge the on-
screen message by pressing the Enter button.
• Unit will not record over previously recorded data.
Auto Delete Mode (ADM) 0-999 days (prevents the unit from displaying or archiving any data that is more than the
selected number of days old. This feature may be required by law in some jurisdictions, please
consult with the local authorities).