5
Inside the dome cover
Components inside the dome cover include:
LEDs.
LED indicators include:
•
Access indicator (green).
Blinks when the camera is accessed.
•
Link indicator (orange).
Lights when the communication network is established.
•
SD memory card error indicator (red).
Lights when an error occurred in the SD memory card.
Indicators on/off switch.
Select
On
or
Off
to determine whether or not to activate the link indicator and
the access indicator.
Select
On
for normal use. When
On
is selected, it is possible to turn indicators on/off using the CamPlus 2
IP Viewer software (refer to the
User Manual
).
Monitor out connector.
This connector is provided only for checking the adjustment of the angular field
of view or the focus on the video monitor when installing or servicing the camera. See
Connections
on
page 15.
Image tilt adjustment ring.
Use this ring to correct image tilt. See
Image tilt adjustment
on page 21.
SD memory card slot.
Insert an SD memory card. See
SD memory cards
on page 23.
Zoom ring.
Use this ring to adjust the angular field of view. See
Angular field-of-view and focus
adjustment
on page 22.
Focus ring.
Use this ring to adjust the focus. See
Angular field-of-view and focus adjustment
on page 22.
Tilting table.
Rotate this table to adjust the tilting angle of the camera. See
Image tilt adjustment
on
page 21.
Panning table fixing screw (Lock).
Fix the panning table with this screw after adjusting the panning
angle of the camera. See
Horizontal position adjustment (panning)
on page 20.
Panning table.
Rotate this table to adjust the panning angle of the camera. See
Horizontal position
adjustment (panning)
on page 20.
Dome cover
Protect the camera head with this dome cover that includes the following components:
Dome cover lock marker.
See
Camera installation
on page 12.
Microphone hole.
This hole is for the microphone input (audio capture). If the hole is blocked, audio may
be garbled.
Inner dome.
Clear dome.
Remove the cover film from the dome cover after the installation is complete. Do not touch
the dome cover with your hands after removing the cover film.
