27
Operation guidelines
To ensure your unit operates optimally, follow these guidelines:
•
Do not aim the camera at strong light sources, such as a spot light, since it causes blooming (light
bleeding) or will smear (vertical lines).
•
When you use a broadband router, use one with port forwarding (NAT, IP masquerade).
•
Do not operate in dusty areas, you may shorten
the life of sensitive internal parts.
•
Keep the camera dry and do not use near water.
•
Handle the camera with care. Do not strike or shake the camera.
•
Minimize the PC monitor image. When you display the same image on the monitor for an extended
period, you can damage the monitor. Use a screen-saver instead.
•
When the system detects an error, for any reason, the camera restarts. The camera will be inoperable
for approximately 30 seconds after you turn the camera on.
•
Unplug the camera during electrical storms or when the camera goes unused for long periods of time.
•
Use only with an approved cart, stand, tripod, bracket, or table. If you use a cart, use caution. Move the
cart so you do not tip it over.
•
Do not tamper with the polarized or grounding-type plug. A polarized plug has two blades, with one
wider than the other. A grounding type plug has two blades and a third grounding prong. If the plug
does not fit, consult an electrician to replace your outlet.
•
Turn the camera off before you clean the camera. Always use a dry cloth. For difficult stains, use a
mild detergent, wipe gently, and finish with a dry cloth. Avoid strong detergents, since you can
discolor the camera. If you use a chemical cloth, follow the designated warnings.
•
Clean the lens with a lens cleaning paper with an alcohol solvent. Do not use a thinner or glass cleaner.
