CamPlus 2 Plastic Dome IP Camera
Installation Manual
26
When you use a DHCP server, you can display the IP address assigned to the camera by clicking the
Refresh
button of the Easy IP Setup software.
3. Complete each network setup item and click
Apply.
See
Figure 33
on page 26.
When you use a DHCP server, it is possible to set
DNS
to
AUTO
.
Figure 33. IP settings)
It may take about 30 seconds to complete the settings upload to the camera. The settings may be invalidated
when the 24 VAC or 12 VDC power supply is cut or when the LAN cable is disconnected before completing
the upload. If this happens, configure the settings again.
When using a firewall (including software), allow access to all UDP ports.