CamPlus 2 Plastic Dome IP Camera
Installation Manual
12
Camera installation
Before starting the installation, turn off the power of the devices including the camera and the PC or disconnect
the power supply.
To install the camera, do the following:
1. Detach the dome cover from the main body (
Figure 10
) and remove the buffer (cushioning).
Figure 10. Detach the cover
2. Line up the ends of the cables (power cord, LAN cable, and the cable from an external device) and the
safety wire, and then bundle them using the cable tie provided. See
Figure 4
on page 7.
3. Attach the safety wire to the camera. After attaching the safety wire to the camera, pull the safety wire
and confirm that the loop at the end of the safety wire is securely hooked on the safety wire holder
(
Figure 11
).
Figure 11. Attach safety wire
Note:
The safety wire is designed to support only the weight of the camera if the camera falls.
4. Connect the power terminal, a LAN cable, and the external I/O terminal. See
Connections
on page 15.
INSE
RT
ADJ
US
T
LO
CK
DO
CO
ME
VE
R
DOM
E
CO
VE
R
Camera mount bracket
Safety wire
Safety wire
holder
Loop at end of
safety wire
