CamPlus 2 Plastic Dome IP Camera
Installation Manual
14
10. Adjust images using a video monitor. Rotate the dome cover clockwise, until the
Dome Cover
indication mark aligns with the
Adjust
position indication mark (
Figure 14
). Then, rotate the clear
dome from side to side while monitoring images on the video monitor to find a place where images are
displayed without vignetting.
Figure 14. Adjust position alignment
11. Rotate the dome cover until the Dome Cover indication mark aligns with the Lock position indication
mark (
Figure 15
).
Figure 15. Lock position alignment and dome cover screw hole
12. Secure the dome cover to the main body using the provided dome cover fixing screw (
Figure 15
).
Note:
The hole located near the dome cover lock marker is the microphone hole. Do not screw onto the microphone hole.
CAUTION:
When adjusting images, if the
Dome Cover
and the
Adjust
indication marks are not properly aligned, you can
cause damage to the camera or a malfunction.
INSE
RT
ADJU
ST
LOC
K
DO
CO
ME
VE
R
DOM
E
CO
VE
R
DOME COVER
INSERT ADJUST LOCK
DOME COVER
INSE
RT
ADJ
UST
LOC
K
DO
CO
ME
VE
R
DOM
E
CO
VE
R
DOME COVER
INSERT ADJUST LOCK
DOME COVER
Indication
marks
Dome cover fixing screw hole