GE Multilin C60, Instruction Manual

Page: 508 / 544

D-2 C60 Breaker Protection System GE Multilin
D.1 OVERVIEW APPENDIX D
D
When using an unbalanced link layer, the following ADSU types are returned in class 2 messages (low priority) with the
indicated causes of transmission:
„
The standard assignment of ADSUs to class 2 messages is used as follows:
„
A special assignment of ADSUs to class 2 messages is used as follows:
5. APPLICATION LAYER
Transmission Mode for Application Data:
Mode 1 (least significant octet first), as defined in Clause 4.10 of IEC 60870-5-4, is used exclusively in this companion
stanadard.
Common Address of ADSU:
„
One Octet
4
Two Octets
Information Object Address:
„
One Octet
4
Structured
„
Two Octets
4
Unstructured
4
Three Octets
Cause of Transmission:
„
One Octet
4
Two Octets (with originator address). Originator address is set to zero if not used.
Maximum Length of APDU: 253 (the maximum length may be reduced by the system.
Selection of standard ASDUs:
For the following lists, the boxes indicate the following:
4
– used in standard direction; – not used;
„
– cannot be
selected in IEC 60870-5-104 standard.
Process information in monitor direction
4
<1> := Single-point information M_SP_NA_1
„
<2> := Single-point information with time tag M_SP_TA_1
<3> := Double-point information M_DP_NA_1
„
<4> := Double-point information with time tag M_DP_TA_1
<5> := Step position information M_ST_NA_1
„
<6> := Step position information with time tag M_ST_TA_1
<7> := Bitstring of 32 bits M_BO_NA_1
„
<8> := Bitstring of 32 bits with time tag M_BO_TA_1
<9> := Measured value, normalized value M_ME_NA_1
„
<10> := Measured value, normalized value with time tag M_NE_TA_1
<11> := Measured value, scaled value M_ME_NB_1
„
<12> := Measured value, scaled value with time tag M_NE_TB_1
4
<13> := Measured value, short floating point value M_ME_NC_1
„
<14> := Measured value, short floating point value with time tag M_NE_TC_1
4
<15> := Integrated totals M_IT_NA_1
„
<16> := Integrated totals with time tag M_IT_TA_1
„
<17> := Event of protection equipment with time tag M_EP_TA_1
„
<18> := Packed start events of protection equipment with time tag M_EP_TB_1
„
<19> := Packed output circuit information of protection equipment with time tag M_EP_TC_1
<20> := Packed single-point information with status change detection M_SP_NA_1